Categories
Contact Us

Haohai Metal Meterials Co., Ltd.

Adress:

Plant No.19, TusPark, Century Avenue, 

Xianyang City, Shaanxi Pro., 712000, China


Tel:  

+86 29 3358 2330 

+86 29 3358 2349


Fax: 

+86 29 3315 9049


E-mail: 

info@pvdtarget.com

sales@pvdtarget.com



Service Hotline
029 3358 2330

Target Bonding

Haohai Metal offers both elastomer bonding and metallic bonding services. X-ray and ultrasound verification are also available upon request.

Product Details


Target Bonding


Sputtering targets can be simply clamped to the sputter source cathode inside the sputter depositing system. However, this procedure can prove costly due to cracking, warping or other damage to the target in use caused by inadequate cooling. Wherever possible, it is good practice to bond the sputter target to a strong, compatible backing plate.


Target Bonding is a critical process and the exact fabricating method employed can vary depending on the choice of the sputtering target material. A properly bonded sputtering target will normally give a longer working life than a non-bonded target, may enable the use of a higher power input to achieve faster sputtering rates and will enable thin film process parameters to be consistently repeated.


Shear stresses that develop between the target and backing plate, due to heating during sputtering, can be a cause of bonding failure when the backing plate and sputtering materials do not have compatible coefficients of thermal expansion. Depending on the dimensional tolerances allowed, the bond thickness can be adjusted to help compensate for these stresses.


Haohai Metal offers both elastomer bonding and metallic bonding services. X-ray and ultrasound verification are also available upon request.


Metallic

Metallic bonds provide good thermal and electrical conductivity and are recommended for most sputtering applications. Indium is the preferred method for bonding sputtering targets due to its high thermal conductivity and is the high efficiency at drawing heat away from targets. Indium is also more malleable than alternative bonding solders. The main limitation of an indium bond is the melting temperature of an indium solder. Indium has a melting point of 156.6°C, and temperatures over 150°C will cause the bond to melt and fail. 


Elastomer

Most materials can be indium bonded, however there are a few exceptions. Elastomer is an alternative bonding method that touts a higher temperature capability over indium bonds. Elastomer bonds are recommended when customers are consistently melting indium bonds. Elastomer bonding is also suitable for low melting point target materials, temperature sensitive compounds and targets that have either low density or are especially fragile.


The comparision of bonding with indium and Elastomer:

Bond MaterialIndiumElastomer
Maximum Operating Temperature150°C250°C
Thermal Conductivity83 W/mK54 W/mK
Coefficient of Thermal Expansion32.1 x 10-6K-12.2 x 10-4K-1
Electrical Resistivity (ohm-cm)8 x 10-60.0476
Bond Coverage>95%>98%
Bond Line Thickness0.010" ± 0.003"0.010" - 0.025"
Target Size1", 2", 3", 4", 5", 6", 7", 8" Diameter1", 2", 3", 4", 5", 6", 7", 8" Diameter
Target MaterialMetal or CeramicMetal or Ceramic



 Haohai Metal Assurance

To improve thermal conductivity under high power inputs, we offer target bonding on backing plates using indium-, elastomer-, aluminum- and silver-based metallic alloy. Durable target bonding requires a variety of pre and post bond functions to assure adhesion. Our quality bonding techniques and process are characterized as following:

1. To eliminate cavities at the edges of a solder bond that may entrap air and form a virtual vacuum leak in your sputtering system.

2. To ensure the thermal integrity of the interface between the system's cooling assembly and the surface of the target.

3. Zone controlled hot plates for precise control of thermal expansion and solderability.

4. C-Scan imaging system is used to detect material flaws, interrogate bonds and accurately measure thickness.

5. X-ray radiographic inspection to verify bond integrity.



For more information about our bonding service, please feel free to call us or send E-mail online.


Hot Tags: target bonding, manufacturers, suppliers, factory, producers, wholesale, price, buy, size, bonding, high quality, high purity, high usage rates
Related Products
Feedback